Hardware Installation
The following items are connected externally to the system module:
■keyboard (included with the system module)
■AT&T VGA 329D color monitor or AT&T 324 monochrome monitor
The following devices may be connected to the system module:
■External modem for remote support
■AT&T 570/571 printer for report printing (AT&T 470/471 printers are also supported).
■Optional cartridge tape drive if AUDIX does not require a DCP board
General Installation Instructions
Procedures are provided here for installing additional memory on the motherboard and for installing circuit boards in the system module.
See Appendix A for information about installing a second hard drive.
If you need additional illustrations or details, see the installation guides provided with each item.
Hardware installation requires the following tools:
■a No.1 or No. 2 Phillips® screwdriver
■a
■a
■an antistatic grounded wrist strap
■an antistatic grounded work mat
