Kyocera 8030 manual Installation Precautions

Installation Precautions

Environment

Caution

Avoid placing the copier on or in locations which are unstable or not level. Such locations may cause the copier to fall down or fall over. This type of situation presents a danger of personal injury or damage to the copier.

Avoid locations with humidity or dust and dirt. If dust or dirt become attached to the power plug, clean the plug to avoid the danger of fire or electrical shock.

Avoid locations near radiators, heaters, or other heat sources, or locations near flammable items, to avoid the danger of fire.

To keep the copier cool and facilitate changing of parts and maintenance, allow access space as shown below. Leave adequate space, especially around the rear cover, to allow air to be properly ventilated out of the copier.

3 15/16"

10 cm

23 5/8" 60 cm

27 9/16"

70 cm

39 3/8" 100 cm

Always use the caster stoppers to stabilize the copier once it is in place to keep it from moving and/or falling over and causing injury.

Other precautions

Adverse environmental conditions may affect the safe operation and performance of

the copier. Install in an air-conditioned room (recommended room temperature: around 73.4 °F

(23 °C), humidity: around 50 %) and avoid the following locations when selecting a site for the copier.

•Avoid locations near a window or with exposure to direct sunlight.

•Avoid locations with vibrations.

•Avoid locations with drastic temperature fluctuations.

•Avoid locations with direct exposure to hot or cold air.

•Avoid poorly ventilated locations.

xiii