Pioneer VSW-1 2 Features, Handling Precautions, Specifications, Installation location, General

Features

1. Quick response

Using the latest circuit technology, this unit suppresses noises and color distortion even during sudden switchovers.

2. Automatic switching

Can be combined with a Pioneer DJ mixer for video switching linked to the fader start mode.

3. Full complement of input/output connectors

Supports component video, S-Video, and composite video IN/OUT signals.

(Signals are only input and output; no conversion function is provided.)

Handling Precautions

Installation location

¶Do not install above an amplifier or other heat-emitting com- ponent, or use for long periods near spotlights or other head- emitting appliances, since the unit may suffer adverse effects.

¶Install away from tuners and television sets. When placed near such components, noise and video distortion may occur; such effects are particularly subject to occurrence when an internal antenna is used; in such cases, either use an external antenna, or turn off this unit’s power.

¶The screws on the right and left sides of this unit can be used to mount the unit in a rack installation or stand. For details,

consult your dealer.

Note:

When installing the unit in a rack or stand, always use the screw holes provided on the right and left sides of the unit.

Cleaning the Unit

÷Use a polishing cloth to wipe off dust and dirt.

÷When the surfaces are very dirty, wipe with a soft cloth dipped in some neutral cleanser diluted five or six times with water and wrung out well, then wipe again with a dry cloth. Do not use furniture wax or cleaners.

÷Never use thinners, benzene, insecticide sprays or other chemicals on or near this unit, since these will corrode the surfaces.

	Features/Specifications
Specifications
1. General
Power	AC 120 V, 60 Hz
Power consumption	8 W
Operating temperature	+5°C to +35°C
Storage temperature	–40°C to +60°C
Operating humidity	5-85 % R.H. (without precipitation)
Weight	1.4 kg
External dimensions	250 (W) x 88 (D) x 87.5 (H) mm

(not including connectors, buttons and other protruding parts)

2. Video input section (input level/impedance)

Component video	BNC connectors x 3 (2 systems)
Y	1	Vp-p / 75 Ω
CB/PB	0.7	Vp-p / 75 Ω
CR/PR	0.7	Vp-p / 75 Ω
S-Video	S connector (2 systems)
Y	1	Vp-p / 75 Ω
C	0.286	Vp-p / 75 Ω
Composite video	RCA connector (2 systems)
	1	Vp-p / 75 Ω

3. Video output section (output level/impedance)

Component video	BNC connectors x 3 (1 system)
Y	1	Vp-p / 75 Ω
CB/PB	0.7	Vp-p / 75 Ω
CR/PR	0.7	Vp-p / 75 Ω
S-Video	S connector (1 system)
Y	1	Vp-p / 75 Ω
C	0.286	Vp-p / 75 Ω
Composite video	RCA connector (1 system)
	1	Vp-p / 75 Ω

4. Sync signal output section

Sync output	BNC connector (2 systems)
		1 Vp-p / 75 Ω
Supported video modulation systems		....................... NTSC/PAL

5. Other connectors

Control input	minijack (3.5 dia) 2 systems
Control output	minijack (3.5 dia) 2 systems

6. Accessories

¶ BNC cables	2
¶ Control cables	2
¶ Operating Instructions	1
¶ Warranty	1

For improvement purposes, specifications and design may be subject to modification without notice.

3