Troubleshooting
Troubleshooting
Incorrect operations are often mistaken for trouble and malfunctions. If you think there is something wrong with this component, check the points below. Sometimes the trouble may originate from another component. Thus, also check the other electrical appli- ances also in use.
If the trouble cannot be rectified even after checking the following items, contact your dealer or nearest PIONEER service center.
Symptom | Cause | Remedy |
|
|
|
Power doesn’t turn on. | ¶ Power cord is not connected. | ¶ Connect power cord to wall outlet. |
|
|
|
No images are seen. | ¶ Cables are not connected properly, or are | ¶ Connect properly. |
| loose. |
|
| ¶ Connectors or plugs and jacks are dirty. | ¶ Clean connectors and plugs, jacks. |
| ¶ Monitor power is not turned on. | ¶ Turn on power to monitor. |
|
|
|
Video images are not | ¶ MODE SELECTOR switch setting differs | ¶ Set the MODE SELECTOR switch to |
synchronized when switching is | from the type of video signal (PAL/NTSC) | match the type of video signal being |
performed. | being played back. | played (PAL/NTSC). |
| ¶ Use of a long cable causes drop in signal | ¶ Change to shorter cables. |
| level or quality. |
|
| ¶ This unit’s sync signal output is not | ¶ Connect properly. |
| connected to the DJ DVD player, or is |
|
| loose. |
|
|
|
|
Color is distorted when | ¶ The setting of the connection panel’s | ¶ Set the CHROMA SYNC switch to |
performing input switching. | CHROMA SYNC switch differs from the | match the kind of signal being played. |
| type of video signal being played back. |
|
|
|
|
This unit inputs do not change | ¶ DJ mixer’s fader start switch is in set to OFF. | ¶ Set DJ mixer’s fader start switch to ON. |
when the DJ mixer’s fader lever | ¶ This unit’s AUTO button is set to OFF | ¶ Press AUTO button to ON (indicator |
is operated. | (indicator is off). | lights). |
| ¶ DJ DVD player’s control cable is not | ¶ Connect properly. |
| connected to this unit, or is loose. |
|
|
|
|
DJ DVD player doesn’t start | ¶ DJ mixer’s fader start switch is set to OFF. | ¶ Set DJ mixer’s FADER START switch to |
when DJ mixer’s fader lever is |
| ON. |
operated. | ¶ Control cables between DJ DVD player and | ¶ Connect control cables properly. |
| this unit, or between DJ mixer and the unit |
|
| are not connected properly, or are loose. |
|
| ¶ This unit’s FADER START switch is set to | ¶ Press this unit’s FADER START switch |
| OFF. | to ON position. |
|
|
|
Static electricity or other external interference may cause the unit to malfunction. To restore normal operation, turn the power off and then on again.
7
