Configuration Testing and Troubleshooting
IVP4 Board Diagnostics
Diagnostics for the IVP4 boards can be run after the initial setup to determine whether everything is connected properly and there is a dial tone. The procedures for running IVP4 board diagnostics are sightly different when AUDIX Voice Power runs on a dedicated computer and when it runs on a computer that is also used for controlling the switch (IS II environment).
To run the IVP4 board diagnostics on a dedicated computer, follow these steps:
1.Log into the system as audix.
2.At the User Login menu, move the cursor to Voice System Administration and press (Enter).
The Voice System Administration menu is displayed.
3.Move the cursor to Configuration Management and press (Enter)
The Configuration Management menu is displayed.
4.Move the cursor to System Control and press (Enter). The System Control menu is displayed.
5.Move the cursor to Diagnose Equipment and press (Enter). The Diagnose Equipment screen is displayed.
6.Fill in the fields as follows:
—Equipment: card
—Equipment Number: all
—Diagnose Immediately? yes
