AT&T 2.1.1 manual Type 100 and press Enter Following message displays

Software Installation

7.Type 1 for a UNIX partition and press (Enter).

The following message appears:

The UNIX System partition must use at least xx% of the hard disk. Indicate the percentage (xx-100) of the hard disk you want this partition to use (or enter "c" to specify in cylinders):

8 . Type 100 and press (Enter).

------------------------—.

The following message displays:

Do you want this to become the Active partition? If so, it will be activated each time you reset your computer or when you turn it on again. Please type "y" or "n".

9.Type Y and press (Enter).

The partition menu displays again:

Total hard disk size is xxxx cylinders

			Cylinders
Partition	Status	Type	Start	End	Length	%
=========	======	======	=====	===	======	===
1	Active	UNIX	sys 0	<end> <max>		100
SELECT ONE	OF THE	FOLLOWING:

1.Create a partition

2.Change Active (Boot from) partition

3.Delete a partition

4.Exit (Update disk configuration and exit )

5.Cancel (Exit without updating disk configuration)

Enter Selection:

Partition 1 is now the active partition.

3-7