Hardware Installation

IVP4 Board

Configuration and Installation

AUDIX Voice Power can use up to three IVP4 boards. Your system may be shipped with the IVP4 boards installed. If you need to add IVP4 boards to the system, the IVP4 board(s) must be configured before they are installed.

Each IVP4 board has two banks of switches. The location of the switches is shown in Figure 2-25.

Figure 2-25. Location of Switches on IVP4 Board

Identifying the IVP4 Board Configuration

There are three versions of the IVP4 board that differ only in the type of switches used. To properly set the switches, you must identify which configuration is used on the board.

2-38

Page 58
Image 58
AT&T 2.1.1 manual IVP4 Board Configuration and Installation