Software Installation
29.Type the password a second time and press (Enter).
—The system displays
The system will be rebuilt.
30.When prompted, reset the system by pressing (Ctrl) + (Alt) + (Del) simultaneously.
31.When you receive a login prompt, log in as root using the password you entered previously.
32.At the # prompt, type installpkg and press (Enter).
For systems with an installed tape drive:
— The system displays
Please indicate the installation medium you intend to use.
Strike C to install from CARTRIDGE TAPE or F to install from FLOPPY DISKETTE.
Strike ESC to stop.
—Type f.
For systems with more than one floppy disk drive:
The system displays
This system has two floppy drives. Strike ENTER to install from drive O or 1 to install from drive 1.
Type 1 and press (Enter) to select drive 1, or just press (Enter) to select drive 0.
NOTE:
If the system configuration includes a tape drive or multiple floppy disk drives, additional prompts may appear. Use the preceding steps as a guide to responding to the system prompts. The actual prompts may vary depending on the system configuration.
