AT&T 2.1.1 manual Opening the 6386E WGS

Hardware Installation

4.Pull the cover towards the front of the computer (the cover will move about 1/2 inch). Then tilt the back of the cover up and remove it. Take care not to catch the cover on any internal cables or wires.

Opening the 6386E WGS

Follow these steps to remove the cover:

1.Be sure the system power is turned OFF. If any cables have been connected to the system module, disconnect them.

2.Unlock the cover lock. (A set of keys is provided with the system module.)

3.Remove the top cover of the system by lifting from the rear as shown in Figure 2-2.

2-6