RCA 25425 manual Parts Checklist, Telephone Jack Requirements, Important Installation Information

Connections & Setup

Parts Checklist

Make sure your package includes the following items:

Base	Handset	Handset cord	Line cords	AC power
				adaptor

Telephone Jack Requirements

To use this phone, you will need an RJ11C (for a single line) or a RJ14C (for two lines) type modular phone jack, which might look like the one pictured here, installed in your home or office. If you don’t have either modular jack, call your local phone company to find out how to get one installed.

Wall plate

Modular

telephone line

jack

VERY IMPORTANT: In order to achieve full system operation (i.e. intercom, page, etc.), Line 1 must be connected and must be common to all phones connected to the system. Only other 25423, 25424, 25425, 25413, 25414, 25415, 25403 and 25404 models are compatible for full system operation. Connecting phones other than the 25423, 25424, 25425, 25413, 25414, 25415, 25403 and 25404 to Line 1 may inhibit the intercom and paging operations.

For proper operation of intercom, page function, etc., DO NOT connect a DSL modem to Line 1.

To transfer a call from one station to another, the two stations should be connected to the same line.

Important Installation Information

•Never install telephone wiring during a lightning storm.

•Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.

•Never touch non-insulated telephone wires or terminals, unless the telephone line is disconnected from the network.

•Use caution when installing or modifying telephone lines.

•Temporarily disconnect any equipment connected to the phone such as faxes, other phones, or modems.