





5 Installing the Scale
This procedure includes all of the steps for installing the
Step 1 Unpacking
Remove the base unit and column from the carton, taking care not to pull on the loadcell cable.
Step 2 Fit the pan to the base unit.
Step 3 Insert the excess loadcell cable into the column. Attach the column to the base unit so as not to damage the loadcell cable. Affix the column to the bracket using four 5mm Allen screws.
Step 4 Select the place for installing the scale.
Consider “4. Caution” on page 8.
Step 5 Level the base unit by using the “Bubble spirit level” and “Levelling feet”.
Step 6 Press the caps at the pole top from both sides and adjust the angle of the display unit.
Step 7 Check the weighing accuracy. If the scale needs calibration, refer to “14 Calibration”.