16.4 Preparation (Setting Parameters)
Step 1 Turn off the display.
Press the ON/OFF switch while the ZERO switch is pressed and held. The function table is displayed.
Step 2 | Select a parameter of the “baud rate ( f4 )” using | ||
| the |
| and ^ switches. |
| ENTER | ||
Step 3 Select “command mode ( f5 1 )” of the “output” using the ENTER and
^ switches.
Step 4 Select “format 1 ( f15 0 )” of the “format” using the ENTER and ^ switches.
Step 5 Press the ENTER switch to store the new parameters.
Return to the normal weighing mode using the
ENTER switch.
Step 6 Receiving a command, the scale replies.
