A&D HV-G Series instruction manual Full/Dribble Batch Function

12 Full/Dribble Batch Function

This function changes the scale to a filling machine which sub-divides a bulk product,e.g. grain, into loads of predetermined and virtually constant mass.

It is necessary to set the parameter of the “comparator function ( f6 9 )”, “ full/dribble batch sub-function ( f10 0 ~ f10 3 )” in the function table, final value (HI), preliminary value (OK) and zero band (LO) in advance to use this function.

It is necessary to install option OP-03 or OP-04, to use the relay output of the full/dribble batch function.

In case of building up a filling machine with a scale and hopper, the performance and processing product of the system are assumed to be as follows:

HV-G Instruction Manual Page 32