Installing the Batteries for Type L | A&D HV-G Series instruction

5.1 Installing the Batteries for Type L

Step 1 Turn off the display.

Remove the AC adaptor.

Step 2 Press and slide to open the external cover. Press the hook of the internal cover to the left side and lift the cover.

Step 3 Insert six new dry cells ensuring correct polarity (+,-). Battery size is ‘D’.

Step 4 Close the covers opened in step 2.

Caution

Replace used dry cells with six new ones, when BATT is displayed.

Do not mix used and new batteries. It may cause damage to the battery or product.

Check the polarity when installing the batteries. If you do not observe this it may cause battery leakage. Also if the polarity of a battery is wrong the scale may only work temporarily.

The battery life is dependent upon the environmental temperature. Remove batteries from the display unit when the scale is not to be used for a long time. They may leak and cause damage.

Damage which is due to battery leakage is not covered under warranty.

HV-G Instruction Manual Page 10

Image 11

A&D HV-G Series instruction manual Installing the Batteries for Type L

Contents

HV-G Series Contents Page Compliance with FCC rules Compliance Outline and Features Unpacking Type Products Accessories Accessories and Options list Options List Order code or option name Accessories Precautions for Storing the Scale Precautions for Installing the ScalePrecautions for Operating the Scale Installing the Scale Installing the Batteries for Type L Names OFF Display and SymbolsPage Switches Page Memo Basic OperationTurning the Scale On/Off & Basic Weighing Type L with Batteries Semi-Automatic Tare Input by Weighing Tare and Net Display Products Weighing Range Weighing RangeWeighing Range Operation and Performance Mode Switch Changing Unit & Mode Storing a Unit Mass Counting Mode Counting the number of articles Storing a 100% Mass Percentage Mode Reading Percentage Function table Meaning & Purpose Operation and SwitchesAccumulation Function Preparation Setting Parameters Example Operation and Performance Examples Function table Meaning and Purpose Comparator FunctionComparator Sign Comparison Condition Accumulation function f6 Step If one Has Been selected, press Case Full/Dribble Batch Function Hold ComparatorFull/Dribble batch sub-function Parameter and display an item of the full/dribble Switch to display the HI Function Table Meaning and purpose Simple batch function Simple Batch Function Preparation Setting Parameters Operation and Performance Examples Calibration Adjusting the Scale Gravity Acceleration Table Gravity Acceleration Correction Complete Calibration Procedure Calibration of the Zero Point Function Table Procedure for Setting Parameters 15.2 Parameter List Function or full/dribble batch function Display Meaning and purpose Printing condition when using option OP-06 for type Function to hold the current display value. When 16 RS-232C Serial Data Interface Format Data Format Format Preparation and Performance Examples Stream Mode Tare Command ModeCancel of tare Upper limit value Preset tare Final value Preparation Setting Parameters 17.1 RS-232C / Relay output / Buzzer OP-03 Pin connections Pin No Signal name Direction DescriptionOptions 17.2 RS-422 / RS-485 / Relay output OP-04 Pin No Signal name Direction Description Installing OP-04 Communication Format Lower limit value Zero Final value Reset of Accumulation data and numberAccumulation data output Accumulation count output Consumables SpecificationInternal Printer for Type V OP-06 Installation Disassembly Performance Check HV-G series Specifications Dimensions Page This situation Confirm these items MaintenanceCheck Points Before Calling Maintenance Repair