Weighing Range, Operation and Performance | A&D HV-G Series manual

7.3 Weighing Range

This is the function to select a weighing range.

The mass value is displayed within a selected range.

There is the automatic range (f2 0) and manual range (f2 1) using the switch.

RANGE

Operation and Performance

Function Table

Meaning and purpose

Automatic range

Weighing range changes automatically as items are placed onto

the pan.

When there is nothing on the pan and the zero point mark is

f2 0

displayed, the scale changes back to the minimum range

automatically

Press the

switch to change to minimum range, when there

ZERO

is nothing on the pan and the zero point mark is not displayed due

to net display or zero offset

Manual range

Press the

switch to expand the range.

RANGE

f2 1

Press the

switch to change to minimum range, when there

RANGE

is nothing on the pan and the zero point mark is displayed

Press the

switch and then the

switch to change to

ZERO

RANGE

minimum range, when there is nothing on the pan and the zero

point mark is not displayed due to net display or zero offset

Weighing Range

Products	Weighing Range
HV-15KGV, HV-15KGL	3kg,	6kg,	15kg

HV-60KGV, HV-60KGL	15kg,	30kg,	60kg

HV-200KGV, HV-200KGL	60kg,	150kg,	220kg

HV-G Instruction Manual Page 19

Image 20

A&D HV-G Series instruction manual Operation and Performance, Products Weighing Range

Contents

HV-G Series Contents Page Compliance Compliance with FCC rules Outline and Features Unpacking Accessories and Options list Type Products Accessories Order code or option name Accessories Options List Precautions for Storing the Scale Precautions for Installing the ScalePrecautions for Operating the Scale Installing the Scale Installing the Batteries for Type L Names Display and Symbols OFFPage Switches Page Memo Basic OperationTurning the Scale On/Off & Basic Weighing Type L with Batteries Tare and Net Display Semi-Automatic Tare Input by Weighing Weighing Range Weighing RangeOperation and Performance Products Weighing Range Mode Switch Changing Unit & Mode Counting Mode Storing a Unit Mass Counting the number of articles Percentage Mode Storing a 100% Mass Reading Percentage Function table Meaning & Purpose Operation and SwitchesAccumulation Function Preparation Setting Parameters Operation and Performance Examples Example Comparator Function Comparator SignComparison Condition Function table Meaning and Purpose Accumulation function f6 Step If one Has Been selected, press Case Full/Dribble Batch Function Hold ComparatorFull/Dribble batch sub-function Parameter and display an item of the full/dribble Switch to display the HI Simple Batch Function Function Table Meaning and purpose Simple batch function Preparation Setting Parameters Operation and Performance Examples Calibration Adjusting the Scale Gravity Acceleration Table Complete Calibration Procedure Gravity Acceleration Correction Calibration of the Zero Point Procedure for Setting Parameters Function Table 15.2 Parameter List Display Meaning and purpose Function or full/dribble batch function Printing condition when using option OP-06 for type Function to hold the current display value. When 16 RS-232C Serial Data Interface Data Format Format Format Stream Mode Preparation and Performance Examples Tare Command ModeCancel of tare Preset tare Upper limit value Final value Preparation Setting Parameters 17.1 RS-232C / Relay output / Buzzer OP-03 Pin connections Pin No Signal name Direction DescriptionOptions Pin No Signal name Direction Description 17.2 RS-422 / RS-485 / Relay output OP-04 Installing OP-04 Communication Format Zero Lower limit value Reset of Accumulation data and number Accumulation data outputAccumulation count output Final value Consumables SpecificationInternal Printer for Type V OP-06 Disassembly Installation Performance Check Specifications HV-G series Dimensions Page Maintenance Check Points Before Calling MaintenanceRepair This situation Confirm these items