Step 6 Press the MODE switch to display the blinking HI (of the final value).
Step 7 Set the final value using the following switches.
^ switch | Selecting the value of a digit. |
< switch | Selecting a digit. |
Step 8 Press the ENTER switch to store the new parameter and display the blinking OK (of preliminary value).
Step 9 Set the preliminary value using the following switches.
^
<
switch | Selecting the value of a digit. |
switch | Selecting a digit. |
Step 10 Press the ENTER switch to store the new parameter and display the blinking LO (of zero band).
Step 11 Set the zero band using the following switches.
^ switch | Selecting the value of a digit |
< switch | Selecting a digit. |
Step 12 Press the ENTER switch to store the new parameter and display the weighing mode.
13.2 Operation and Performance (Examples)
Step | 1 | Select the parameter f6 8 of the function table. |
Step | 2 | Set the parameters of the final value, preliminary value and zero band. |
Step | 3 | The comparison result is always displayed. |
