15 The Function Table
The function table is provided to store and reference items that determine the performance of the scale. Each item has a parameter.
The parameters are maintained even without power applied.
15.1 The Procedure for Setting Parameters
Step 1 Turn off the display.
Press the ON/OFF switch while the ZERO switch is pressed and held. The function table is displayed.
Step 2 Set parameters for each item using the following
switches. |
| |
^ switch | Selecting the parameter of an item. | |
|
| Selecting the value of a digit at f16. |
< switch | Selecting a digit at f16.. | |
F switch | Proceeding to the end of the table | |
|
| without storing the parameter. |
| switch | Storing a parameter for the current |
ENTER | ||
|
| item and proceeding to the next item. |
|
| Returning to normal mode from the |
|
| end of the table. |
Step 3 Press the ENTER switch to return to the normal mode, when end is displayed.
Note Pressing the ENTER
stored in the scale.
switch on step 2, the parameter is
