A&D HV-G Series instruction manual Preparation Setting Parameters

Function table	Meaning & Purpose
f8 4	When the display is a stable value, the scale accumulates the data
	automatically. The next accumulation can be performed after the
	display returns to near-zero.
	Used for recording the number and mass of articles removed from the
	pan. (Put the articles on the pan. Press the		switch at each
		TARE
	removal.)
f8 5	At each finish of the full/dribble batch function, the scale accumulates
	the data automatically.
	Used for packaging articles like a powder, it is used for recording the
	bag number and total mass.

10.1 Preparation (Setting Parameters)

Step	1	Turn off the display.
		Press the			switch while the				switch is
			ON/OFF				ZERO
		pressed and held. The function table is displayed.
Step	2	Press the			switch to display an item of the
				ENTER
		accumulation function ( f8 ).
Step	3	Select a parameter of the accumulation function ( f8 1
		~ f8 4 ) with the ^ switch.
Step	4	Press the			switch to store the new parameter.
				ENTER
		Press the F switch and the						switch to exit from
						ENTER
		the function table. Then the scale displays the weighing
		mode.

HV-G Instruction Manual Page 26