A&D HV-G Series Accumulation Function, Operation and Switches, Function table Meaning & Purpose

10 Accumulation Function

This function counts the number of weighed items, calculates the total mass value and can display the number and accumulated mass value.

It is necessary to set the parameters of the “accumulation function (f8 )” in the function table in advance to use this function.

It is necessary to set the parameters of the “print mode ( f9 )” in the function table in advance to use the optional built-in printer.

Operation and Switches
The display of the accumulation count has a blinking	without a unit

The display of the accumulation value has a unit and a blinking

Pressing the MODE switch, the accumulation count and accumulation value is displayed.

Pressing the ZERO switch in the accumulation function (while a blinking ) resets the current function. (The count and accumulated value become zero.)

When the optional built-in printer is installed and the PRINT switch is pressed, the accumulation data, date and data number are printed. Date is set at function table f16 .

Caution

The accumulation function can only be used with the first weighing unit accumulated.

Parameter List and Word Definition

The “near-zero” is within ±4 digits from the zero point in the unit of kg. The “digit” a unit of display, is equivalent to the minimum graduation. The “zero point” is the fundamental starting point to weighing.

Function table			Meaning & Purpose
	f8	0	Accumulation function is not used.
			The scale accumulates the data, if the F switch is pressed when
			the display is a positive stable value above near-zero. The next
	f8	1	accumulation can be performed after the display returns to
			near-zero or to a negative value.
	f8	2	The scale accumulates the data, if the F switch is pressed, when
			the display is a stable value and outside near-zero. The next
			accumulation can be performed after the display returns to
			near-zero.
	f8	3	When the display is a positive stable value, the scale accumulates
			the data automatically. The next accumulation can be performed
			after the display returns to near-zero or to a negative value.

HV-G Instruction Manual Page 25