7 Basic Operation
7.1 Turning the Scale On/Off & Basic Weighing
7.1.1 Type V or Type L with AC adaptor
Step | 1 | Connect the scale to a ground point. | ||||||
Step | 2 | Ensure that the pan is empty. | ||||||
Step | 3 | Confirm that local voltage and receptacle type fit your scale. | ||||||
Step | 4 | The scale turns on/off using the |
|
| switch alternately. | |||
ON/OFF | ||||||||
Step | 5 | Check the accuracy of weighing. If you calibrate the scale, perform it after | ||||||
|
| allowing the scale to warm up for 30 minutes. | ||||||
Step | 6 | Press the |
| switch to display zero. (With nothing on the pan.) | ||||
ZERO | ||||||||
Step | 7 | Place something on the pan gently. | ||||||
Step | 8 | You can read the weight after the stability mark is displayed. | ||||||
Step | 9 | Remove the item from the pan. | ||||||
Step 10 | Turn the scale off using the |
|
| switch. | ||||
ON/OFF | ||||||||
Memo
With the power cord connected, type V consumes only sufficient power for standby status after turning off the scale.
With the AC adaptor connected, type L consumes only the power of the AC adaptor after turning off the scale.
