Brocade Communications Systems 53-1002163-02 manual Configuring a Vlan classifier rule

Configuring protocol-based VLAN classifier rules 6

NOTE

FCoE Initialization Protocol (FIP) and FCoE cannot be manually configured in VLAN classifier rules. They are part of the fcoeport interface configuration and are applied automatically when an interface is configured as fcoeport.

For complete information on all available VLAN classifier rule options, see the Converged Enhanced Ethernet Command Reference.

Configuring a VLAN classifier rule

To configure a protocol-based VLAN classifier rule, perform the following steps from privileged EXEC mode.

1.Enter the configure terminal command to access global configuration mode.

2.Enter the vlan classifier rule command to configure a protocol-based VLAN classifier rule.

switch(config)#vlan classifier rule 1 proto ip encap ethv2

Configuring MAC address-based VLAN classifier rules

To configure a MAC address-based VLAN classifier rule, perform the following steps from privileged EXEC mode.

1.Enter the configure terminal command to access global configuration mode.

2.Enter the vlan classifier rule command to configure a MAC address-based VLAN classifier rule.

switch(config)#vlan classifier rule 5 mac 0008.744c.7fid

Deleting a VLAN classifier rule

VLAN classifier groups (1 through 16) can contain any number of VLAN classifier rules.

To configure a VLAN classifier group and remove a VLAN classifier rule, perform the following steps from privileged EXEC mode.

1.Enter the configure terminal command to access global configuration mode.

2.Specify a VLAN classifier group and delete a rule.

switch(config)#no vlan classifier rule 1

Creating a VLAN classifier group and adding rules

VLAN classifier groups (1 through 16) can contain any number of VLAN classifier rules.

To configure a VLAN classifier group and add a VLAN classifier rule, perform the following steps from privileged EXEC mode.

1.Enter the configure terminal command to access global configuration mode.

2.Create a VLAN classifier group and add a rule.

switch(config)#vlan classifier group 1 add rule 1

Converged Enhanced Ethernet Administrator’s Guide	53
53-1002163-02