CEE Command Line Interface

2

NOTE

While this example uses the admin role to log in to the switch, any role listed in the “CEE CLI RBAC permissions” section can be used.

switch login: admin Password: switch:admin> cmsh switch#

To return to the Fabric OS CLI, enter the following command.

switch#exit switch:admin>

NOTE

Multiple users can use Telnet and issue commands using EXEC mode and privileged EXEC mode.

Accessing the CEE CLI from the Fabric OS shell

To enter the CEE CLI from the Fabric OS shell, enter the following command.

switch:admin> cmsh switch#

To return to the Fabric OS shell, enter the following command.

switch#exit switch:admin>

CEE CLI command modes

Figure 2 displays the CEE CLI command mode hierarchy.

FIGURE 2 CEE CLI command mode hierarchy

Interface configuration

Port-channel

10-Gigabit Ethernet

VLAN

EXEC

Privileged EXEC

Global configuration

Protocol configuration

LLDP

Spanning-tree

CEE CLI features

CEE map

ACLs

Console and VTY (line)

configuration

Console

Virtual terminal

Table 4 lists the CEE CLI command modes and describes how to access them.

Converged Enhanced Ethernet Administrator’s Guide

15

53-1002163-02

 

Page 37
Image 37
Brocade Communications Systems 53-1002163-02 manual Accessing the CEE CLI from the Fabric OS shell, CEE CLI command modes