Brocade Communications Systems 53-1002163-02 manual Rstp overview, Active topology?

RSTP overview 7

This does not apply to ports connected to workstations or PCs; these ports remain in the forwarding state.

5. Enter the copy command to save the running-configfile to the startup-configfile.

When the spanning tree topology is completed, the network switches send and receive data only on the ports that are part of the spanning tree. Ports that receive superior BPDUs are automatically place in blocking mode.

NOTE

Brocade recommends leaving other STP variables at their default values.

For more information on STP, see “STP, RSTP, and MSTP configuration and management” on page 64.

RSTP overview

NOTE

RSTP is designed to be compatible and interoperate with STP. However, the advantages of the RSTP fast reconvergence are lost when it interoperates with switches running STP.

The IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) standard is an evolution of the 802.1D STP standard. It provides rapid reconvergence following the failure of a switch, a switch port, or a LAN. It provides rapid reconvergence of edge ports, new root ports, and ports connected through point-to-point links.

The RSTP interface states for every Layer 2 interface running RSTP are as follows:

•Learning—The interface prepares to participate in frame forwarding.

•Forwarding—The interface forwards frames.

•Discarding—The interface discards frames. Note that the 802.1D disabled, blocking, and listening states are merged into the RSTP discarding state. Ports in the discarding state do not take part in the active topology and do not learn MAC addresses.

Table 15 lists the interface state changes between STP and RSTP.

TABLE 15 STP versus RSTP state comparison

STP interface state	RSTP interface state	Is the interface included in the
		active topology?

Is the interface learning MAC addresses?

Disabled	Discarding	No	No
Blocking	Discarding	No	No
Listening	Discarding	Yes	No
Learning	Learning	Yes	Yes
Forwarding	Forwarding	Yes	Yes

Converged Enhanced Ethernet Administrator’s Guide	59
53-1002163-02