Brocade Communications Systems 53-1002163-02 instruction

Creating an FCoE login group

4

Modifying the FCoE login group device list

Perform the following tasks to add or remove VN_port devices from the FCoE login group.

Task	Command

Add VN_port devices to the FCoE login group.	switch:admin> fcoelogingroup --add lgname member;
Syntax is as follows:	member; ....

•lgname—Specify the name of the login group to which VN_port devices are to be added.

•member—Identify the WWN of the VN_port. The WWN must be specified in hex as xx:xx:xx:xx:xx:xx:xx:xx. Only specified members are allowed to log in to the switch.

Remove VN_port devices from the FCoE login	switch:admin> fcoelogingroup --remove lgname
group. Syntax is as follows:	member; member;…

•lgname—Specify the name of the login group from which VN_port devices are to be removed.

•member—Identify the WWN of the VN_port. The WWN must be specified in hex as xx:xx:xx:xx:xx:xx:xx:xx. Only specified members are allowed to log in to the switch.

Deleting an FCoE login group

Perform the following task to delete an FCoE login group.

Task	Command

Delete an FCoE login group. Syntax is as follows:	switch:admin> fcoelogingroup --delete lgname
• lgname—Specify the name of the login
group.

Renaming an FCoE login group

Perform the following task to rename an FCoE login group.

Task	Command

Rename an FCoE login group. Syntax is as	switch:admin> fcoelogingroup --rename lgname
follows:	newlgname

•lgname—Specify the name of the login group from which VN_port devices are to be removed.

Converged Enhanced Ethernet Administrator’s Guide	29
53-1002163-02

Image 51

Brocade Communications Systems 53-1002163-02 Modifying the FCoE login group device list, Deleting an FCoE login group

Contents

Converged Enhanced Ethernet Title Publication number Summary of changes Date Brocade Communications Systems, Incorporated Title Publication number Summary of changes Date Converged Enhanced Ethernet Administrator’s Guide Contents This chapter Chapter Using the CEE CLI Chapter Initial FCoE and CEE Configuration Chapter Configuring STP, RSTP, and Mstp Chapter Configuring Link Aggregation 107 101 123 127131 Appendix a Strict priority and Weighted Round Robin scheduler Strict priority schedule two queuesWRR schedule two queues Page Tables Page How this document is organized Configuring VLANs, describes how to configure VLANsAbout This Document This chapter What’s new in this document Supported hardware and software Command syntax conventions Document conventionsText formatting Additional information Key termsCorporation Referenced Trademarks and Products Getting technical help Brocade resourcesOther industry resources FT00X0054E9 Document feedback Term Description Introducing FCoEFCoE terminology FCoE overview FCoE hardware Layer 2 Ethernet overview Layer 2 forwardingLayer 2 Ethernet overview Loop-free network environment Vlan tagging Congestion control and queuing Frame classification incoming Converged Enhanced Ethernet Administrator’s Guide Trunking Access control FCoE Initialization Protocol Flow ControlFIP discovery FIP logout FIP login FCoE Initialization Protocol FCoE loginLogincfg FCoE logout Name server FC zoningRegistered State Change Notification Rscn FCoE queuing Upgrade and downgrade considerations for FCoE Using the CEE CLI CEE Command Line InterfaceManagement Tools Saving configuration changes with the write memory command Saving your configuration changesAccessing the CEE CLI through the console or Telnet Saving configuration changes with the copy command Accessing the CEE CLI from the Fabric OS shell CEE CLI command modesTo return to the Fabric OS CLI, enter the following command Interface port-channel Keystroke Description CEE Command Line Interface CEE CLI command modesCEE CLI keyboard shortcuts Lists CEE CLI keyboard shortcuts Displaying CEE CLI commands and command syntax Using the do command as a shortcut CEE CLI command output modifiers CEE CLI command completion Tee CEE Command Line Interface CEE CLI command output modifiers Configuration management Configuration management tasksCEE configuration guidelines and restrictions Erasing the startup configuration file Display the running configuration fileSaving the running configuration file Loading the startup configuration file Restore an archived startup configuration file Flash file management commandsDebugging and logging commands Archiving the startup configuration file Switch#show debug This chapter FCoE Configuration ManagementManaging the FCoE configuration FCoE configuration guidelines and restrictions Enabling or disabling login configuration management Configuring the FCoE login informationClearing logins Displaying FCoE configuration-related information Managing the current configuration transaction Cleaning up login groups and VNport mappingsDisplaying the FCoE login configuration Creating an FCoE login group Saving the current FCoE configurationCreating an FCoE login group Perform the following task to delete an FCoE login group Modifying the FCoE login group device listDeleting an FCoE login group Renaming an FCoE login group Creating an FCoE login group Initial FCoE and CEE Configuration End to End FCoE using FC ISLsOverview FCoE port-to-front end TenGigabit port mapping FCoE Logical Port Numbering Protocol type Time interval High availabilityHot plug Control Processor failover Operation, data, or state Expected behavior High availability reference Configuring the FCoE Vlan Configuring the FCoE interfaces Show vlan fcoe Assigning an FCoE map onto an interface Activate the protocol Configuring DcbxReturn to the privileged Exec mode using the end command Repeat this procedure for any additional interfaces Configuring Spanning Tree Protocol Configuring Vlan membershipConfiguring Spanning Tree Protocol Bandwidth% CEE map configuration CoSPGID Activate the CEE map modeDefining a Priority Group Table map Define the CEE map for Pgid Defining a Priority-Table map Applying a CEE provisioning map to an interfaceVerifying the CEE maps Activate privileged Exec mode CEE audit logsName Example Description Page CEE audit logs Configuring VLANs Vlan overviewIngress Vlan filtering Displays the frame processing logic for an incoming frame Vlan configuration guidelines and restrictions Default Vlan configurationParameter Default setting Creating a Vlan interface Vlan configuration and managementConfiguring the MTU on an interface port Enabling and disabling an interface port Configuring a Vlan interface to forward FCoE traffic Enabling STP on a VlanDisabling STP on a Vlan Configuring an interface port as a Layer 2 switch port Configuring an interface port as an access interfaceConfiguring an interface port as a trunk interface Disabling a Vlan on a trunk interface Configuring an interface port as a converged interface Configuring protocol-based Vlan classifier rules Configuring protocol-based Vlan classifier rulesDisabling a Vlan on a converged interface Creating a Vlan classifier group and adding rules Configuring a Vlan classifier ruleConfiguring MAC address-based Vlan classifier rules Deleting a Vlan classifier rule Displaying Vlan information Configuring the MAC address tableActivating a Vlan classifier group with an interface port Clearing Vlan counter statistics Adding static addresses to the MAC address table Specifying or disabling the aging time for MAC addresses Configuring the MAC address table STP overview Configuring STP, RSTP, and Mstp Configuring STP Is the interface learning MAC addresses? Rstp overviewSTP interface state Rstp interface state Active topology? Configuring Rstp Mstp overview Mstp overview Configuring Mstp Default STP, RSTP, and Mstp configuration Enabling STP, RSTP, or Mstp STP, RSTP, and Mstp configuration and management Specifying the bridge priority STP, RSTP, and Mstp configuration and managementDisabling STP, RSTP, or Mstp Shutting down STP, RSTP, or Mstp globally Specifying the bridge forward delay Specify the bridge forward delaySpecifying the bridge maximum aging time Specifying the port-channel path cost Enabling the error disable timeout timerSpecifying the error disable timeout interval Enable the error disable timeout timer Specifying the bridge hello time STP and Rstp Specifying the transmit hold count Rstp and MstpSpecify the port-channel path cost Enabling Cisco interoperability Mstp Disabling Cisco interoperability MstpMapping a Vlan to an Mstp instance Specifying a name for an Mstp region Specifying a revision number for an Mstp configurationEnter the region command to assign a name to an Mstp region Specifying the maximum number of hops for a Bpdu Mstp Flushing MAC addresses Rstp and Mstp Clearing spanning tree countersClearing spanning tree-detected protocols Enabling automatic edge detection Configuring STP, RSTP, or Mstp on CEE interface portsConfiguring the path cost Displaying STP, RSTP, and MSTP-related information Enabling the guard root Enabling a port interface as an edge port Enter the no shutdown command to enable the CEE interface Specifying the Mstp hello timeSpecifying restrictions for an Mstp instance Specifying a link type Enabling port fast STPSpecifying the port priority Restricting the port from becoming a root port Restricting the topology change notificationEnabling spanning tree Disabling spanning tree Configuring STP, RSTP, or Mstp on CEE interface ports Configuring Link Aggregation Link Aggregation Group configurationLink aggregation overview Converged Enhanced Ethernet Administrator’s Guide Data Center Core Brocade-proprietary aggregation Link Aggregation Control ProtocolDynamic link aggregation Static link aggregation LAG distribution process Lacp configuration guidelines and restrictionsDefault Lacp configuration Lacp configuration and management Enter the switchport mode command to set the mode Enabling Lacp on an interface in Layer 2 modeConfiguring the Lacp system priority Configuring the Lacp timeout period on a CEE interface Displaying Lacp information Lacp troubleshooting tipsClearing Lacp counter statistics on a LAG Clearing Lacp counter statistics on all LAG groups Deskew calculation failed for link link-name Lldp overview Configuring Lldp Layer 2 topology mapping Layer 2 topology mapping Dcbx overview Enhanced Transmission Selection ETS Priority Flow Control PFCPriority Priority group Bandwidth check Lldp configuration guidelines and restrictions Default Lldp configurationDcbx interaction with other vendor devices Enabling Lldp globally Lldp configuration and managementDisabling and resetting Lldp globally Configuring Lldp global command options Specifying a user description for Lldp Specifying a system name for the Brocade FCoE hardware Configuring the transmit frequency of Lldp frames Configuring the hold time for receiving devicesAdvertising the optional Lldp TLVs Configure the FCoE priority bits Configuring the advertisement of Lldp DCBX-related TLVsConfiguring FCoE priority bits Advertise the Lldp DCBX-related TLVs using these commands Configuring Lldp profiles Configuring iSCSI priority bits Configuring the iSCSI profile Configuring Lldp interface-level command options Clearing LLDP-related informationDisplaying LLDP-related information Display Lldp neighbor-related detail information Display Lldp interface-related informationDisplay all Lldp statistics Lldp configuration and management ACL overview Configuring ACLs Creating a standard MAC ACL and adding rules Default ACL configurationACL configuration guidelines and restrictions ACL configuration and management Modifying MAC ACL rules Creating an extended MAC ACL and adding rules Enter the no seq command to delete the existing rule Removing a MAC ACLReordering the sequence numbers in a MAC ACL ACL configuration and management Applying a MAC ACL to a CEE interfaceApplying a MAC ACL to a Vlan interface ACL configuration and management QoS overview Configuring QoS User-priority mapping Default user-priority mappings for untrusted interfacesRewriting Queueing Incoming CoS User Priority Configuring the QoS trust mode Configuring user-priority mappings Creating a CoS-to-CoS mutation QoS mapApplying a CoS-to-CoS mutation QoS map Traffic class mapping Unicast trafficUser priority Traffic class Queueing Multicast trafficMapping CoS-to-Traffic-Class Activating a mapping CoS-to-Traffic-Class Congestion control Tail dropVerifying a mapping CoS-to-Traffic-Class Changing the Tail Drop threshold Ethernet pause Enabling Ethernet Pause Ethernet Priority Flow Control Enabling an Ethernet PFC Enable trust mode on the interfaceEnable an Ethernet PFC on the interface Multicast rate limiting Deficit weighted round robin scheduling SchedulingStrict priority scheduling Scheduling the QoS queue Traffic class scheduling policy Multicast queue scheduling Scheduling the QoS multicast queueMulticast traffic class Equivalent unicast traffic class Pgid Defining a priority group table Defining a priority-table mapSpecify the name of the CEE map to define Verifying the CEE maps Applying a CEE provisioning map to an interface Configuring 802.1x Port Authentication 802.1x configuration guidelines and restrictions802.1x protocol overview Configuring 802.1x on specific interface ports 802.1x authentication configuration tasksInterface-specific administrative tasks for Configure authentication Between the switch and CNA or NIC Configure reauthentication for the interface port Configuring 802.1x timeouts on specific interface portsConfigure the timeout interval Enable 802.1x authentication for the interface port Interface-specific administrative tasks for Configuring Igmp About IgmpActive Igmp snooping Multicast routing Configuring Igmp Configuring Igmp snooping mrouter Configuring Igmp snooping querier Monitoring Igmp Configure the mrouter timeout value Configuring Rmon group statistics collection Configuring RmonRmon configuration and management Default Rmon configuration Configure Rmon group statistics on the interface Configuring Rmon settingsConfiguring Rmon events Enable the CEE interface Display the Rmon history Configuring Rmon history collectionRmon configuration and management Configure the Rmon event Activate Rmon history collection for the interface Rmon configuration and management Switch Brocade 8000 Replacement Enhanced Group Management license Brocade 8000 Replacement Originalswitchadmin cfgactvshow Bring the new switch back online Upload the startup-configfile to the new switchUpload the running-configfile to the new switch Originalswitchadmin switchname originalswitch Brocade 8000 Replacement 802.1x Index QoS, 113 queuing FIP Lldp Layer Radius Vlan