Brocade Communications Systems 53-1002163-02 manual Managing the current configuration transaction

Configuring the FCoE login information 4

Managing the current configuration transaction

NOTE

The configuration changes created using the fcoelogingroup command are kept in a transaction buffer until you save the buffer using the fabric-wide fcoelogincfg--savecommand. The login configuration is saved as a transaction, and to apply it you need to specifically save it.

Perform one of the following tasks to either display or abort the current configuration transaction.

Task	Command
Display the current configuration transaction.	switch:admin> fcoelogincfg --transshow
Abort the current configuration transaction.	switch:admin> fcoelogincfg --transabort

Cleaning up login groups and VN_port mappings

Perform the following tasks to clean up login groups and VN_port mappings.

Task	Command
Perform a cleanup of all conflicting login groups	switch:admin> fcoelogincfg --purge -conflicting
and VN_port mappings from the effective	-nonexisting
configuration. This purges not only the conflicting
login groups but also the non-existing switches.
Perform a cleanup of all conflicting login groups	switch:admin> fcoelogincfg --purge -conflicting
and conflicting VN_port mappings from the
effective configuration.
Perform a cleanup of all login groups for	switch:admin> fcoelogincfg --purge -nonexisting
non-existing switches from the effective
configuration.

Displaying the FCoE login configuration

Perform the following tasks to display the FCoE login configuration.

Task	Command
Display the FCoE login configuration. Syntax is as	switch:admin> fcoelogincfg --show [-switch swwn
follows:	-logingroup lgname] [-saved]

•-switchswwn—Displays all of the login groups for the specified switch.

•-logingrouplgname—Displays the login group configuration for the specified login group.

•-saved—Displays only the effective configuration.

Display the status of the last configuration merge switch:admin> fcoelogincfg --show[-mergestatus] during the last fabric merge. This operand also

displays conflicting login groups and login groups for non-existing switches.

Converged Enhanced Ethernet Administrator’s Guide	27
53-1002163-02