Nortel Networks warranty Configuring the MG 1000E ports, Type Supl, Slot, Supt Ipmg, Ipro

Configuring the CS 1000E Call Server Page 213 of 488

The type of any Bandwidth Management Zone for MG 1000E with conference resources configured must be shared.

Distortion in Music is expected when G.729AB codec is used. Hence the Interzone and the Intrazone policies for an MG 1000E Bandwidth Management Zone should have Best Quality to give preference to G711 codec to minimize of occurrence of music distortion.

IMPORTANT!

Currently, the CS 1000E only supports Recorded Announcement

Broadcast and Music Broadcast.

Ensure that the bandwidth provisioned is adequate to provide the acceptable blocking level of the resources in the MG 1000E. Refer to the Communication Server 1000E: Planning and Engineering (553-3041-120) for details.

Configuring the MG 1000E ports

IP addresses must be configured on the Call Server for each MG 1000E in the system. Use LD 97 to configure the MG 1000E ports.

LD 97 – Configuring the MG 1000E ports (Part 1 of 2)

Prompt	Response	Comment
REQ	CHG	Change existing data
TYPE	SUPL	Superloop
SUPL	0, 4, 8, -252	Superloop number
SLOT	<cr>	Select default
SUPT	IPMG	MG 1000E
IPRO	xx.xx.xx.xx	IP address of the first MG 1000E Uplink IP address; <cr> to
		skip to IPR1 when configuring new superloop.

Communication Server 1000E Installation and Configuration