Nortel Networks 1000E warranty Stand-alone Signaling Server configuration

Installing and configuring the Signaling Server software Page 191 of 488

Figure 70

Stand-alone Signaling Server configuration

CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)

=====================================================================

Please define the data networking parameters for this Standalone Signaling Server. Note that the ELAN parameters are necessary for management access (e.g. SNMP).

Hostname	: SS_SA
ELAN IP	: 192.168.10.20

ELAN subnet mask: 255.255.255.0

ELAN gateway IP : 192.168.10.1

TLAN IP		:	192.168.20.20
TLAN	subnet mask:		255.255.255.0
TLAN	gateway IP :		192.168.20.1

14Enter the Primary NRS IP address or the Alternate NRS IP address, depending on the option entered in step 11 on page 187 or step 12 on page 188.

•If b was entered in step 12, enter the address of the Primary NRS. See Figure 71 on page 192.

•f a was entered in step 12, you can enter the address of the Alternate NRS if you know it, but it is not required. See Figure 72 on page 192.

•If c was entered in step 12:

—Enter the address of the Primary NRS. See Figure 71.

—Enter the address of the Alternate NRS. See Figure 72.

•If d was entered in step 11:

—Enter the address of the Primary NRS (optional). See Figure 71.

—If you did enter the address of the Primary NRS, enter the address of the Alternate NRS (also optional). See Figure 72.

The Gatekeeper configuration can be updated later using Element

Manager.

Communication Server 1000E Installation and Configuration