Nortel Networks 1000E warranty Zmodem requirements Feature Setting

Connecting a Terminal Server Page 261 of 488

Where:

xx= port number

2Enable a dedicated service using rlogin. Enter the command:

DEFINE PORT XX RLOGIN DEDICATED SERVICE xx.xx.xx.xx

Where:

xx= port number

xx.xx.xx.xx = port IP address

3Enable the port to be accessible only by local command and from a serial connection only. Enter the command:

DEFINE PORT xx ACCESS LOCAL

Where:

xx= port number

4Enable the In-Reach Element Manager to complete a ZMODEM transfer using the rlogin feature. Enter the command:

DEFINE PORT xx RLOGIN TRANSPARENT MODE ENABLED

Where:

xx= port number

Note 1: When the rlogin transparent mode is enabled, characters are passed raw (without interpretation) and transparently within an rlogin session. This allows the ZMODEM transfer to complete. See Table 16 for ZMODEM requirements.

Table 16

ZMODEM requirements

Feature	Setting
Typeahead	1024
TCP window size	1024
telnet CSI ES	Enabled
telnet NEW LINE FILTER	LF or Standard

Communication Server 1000E Installation and Configuration