Nortel Networks 1000E warranty Configuring a terminal and SDI ports, Contents

276

Page 267 of 488

Configuring a terminal and SDI ports

Contents

This section contains information on the following topics:

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267

Setting the TTY terminal port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 268

Traditional terminal SDI connection. . . . . . . . . . . . . . . . . . . . . . . . . . . 268

CS 1000E Core Call Server SDI connection. . . . . . . . . . . . . . . . . . . . . 269

MG 1000E SDI connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270

MG 1000T SDI connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270

Signaling Server SDI connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273

BayStack 470 SDI connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274

Media Card SDI connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274

Introduction

In the CS 1000E system, each stand-alone module (Call Server, MG 1000E, MG 1000T, Signaling Server, and Baystack switch) has a Serial Data Interface (SDI) port to be used for software installation and maintenance access. The SDI port can be accessed by running a Telnet session through the Terminal Server locally or remotely. See “Configuring a Terminal Server” on page 255 for Terminal Server Setup. The SDI port can also be accessed by a local terminal through the SDI connection.

Communication Server 1000E Installation and Configuration