Nortel Networks 1000E warranty Disabling a card unit

Page 348 of 488 Installing and configuring a Voice Gateway Media Card

The list in the web page changes to show a list of diagnostics you can use, as shown in Figure 120 on page 345.

3Select Network & Peripheral Equipment Diagnostics from the list in Figure 120 on page 345.

The Network and Peripheral Diagnostics web page opens, as shown in Figure 121 on page 346.

4Select the DISC – Disable card command from the Card Commands drop-down list.

5Enter the card number in the corresponding Command Parameter text box.

6Click Submit to the right of the text box.

The output from this command is shown in the text box in the lower half of the web page.

End of Procedure

Note: For graceful disabling of the voice gateway channels refer to

“Graceful Disable” in IP Line: Description, Installation, and Operation (553-3001-365).

Disabling a card unit

Follow Procedure 86 to disable a Voice Gateway Media Card unit in

Element Manager.

Procedure 86

Disabling a Voice Gateway Media Card unit using Element Manager

1Select System > Maintenance from the navigator.

The Maintenance web page opens as shown in Figure 119 on page 344. This page allows you to perform maintenance using overlays or using a selected functionality. The default is overlay, as shown in Figure 119.

2Select Select by Functionality.

The list in the web page changes to show a list of diagnostics you can use, as shown in Figure 120 on page 345.

3Select Network & Peripheral Equipment Diagnostics from the list in Figure 120 on page 345.

553-3041-210 Standard 4.00 September 2007