GE ZDP48N6D, ZDP36L4D, ZDP30N4, ZDP30L4, ZDP48N6R, ZDP48L4G Oven racks, How to set the oven controls

Using the Ovens

Stainless Steel Range

Oven racks

To avoid possible burns, place the oven racks in the correct position before you turn the oven on.

The correct rack position depends on the kind of food and the browning desired.

The oven racks have stop-locks, so that when placed correctly on the supports, they will stop before coming completely out, and will not tilt. When placing and removing cookware, pull the rack out to the bump on the rack support.

To remove a rack, pull it toward you, tilt the front end up and pull it out.

To replace, place the end of the rack on the support, tilt up the front and push in.

The rack stop-lock prevents the rack from tilting or being pulled out of the oven.

To remove, pull rack out and lift up the front.

How to set the oven controls

350

1 Select the desired oven mode by pushing one of the Mode Selector Buttons: BAKE, CONV, BROIL, or CLEAN.

2 Select the desired temperature by turning the Oven Thermostat Knob.

•The Oven light will glow and remain on until the OFF selector button has been pushed or the thermostat dial has been turned to the OFF (O) position.

•The Heating light will glow. The oven is preheated to the set temperature when the Heating light initially cycles off.

3 Turn the oven off by pushing the OFF Mode Selector Button.

Oven Control

D

C

B

A

When roasting, use the B or C rack position.

22