Nortel Networks 1000E warranty Checking the status of the Elan network interfaces

Page 278 of 488 Verifying the network

Checking the status of the ELAN network interfaces

Follow Procedure 71 to check the status of the ELAN network interfaces.

Note: IP addresses used are for example only.

Procedure 71

Checking the status of the ELAN network interfaces

1Observe the ELAN Ethernet LEDs (Layer 2 network link) on all Media Gateway SSC cards. See Figure 94 on page 284.

a.If the ELAN LED is green, the Link is established.

b.If the Link LED is not lit, check all cable connections to ensure that they are connected correctly, and not damaged.

The ELAN red and yellow LEDs flash when there is network activity.

Note: Cards in slot 1 can make viewing difficult.

553-3041-210 Standard 4.00 September 2007