Nortel Networks 1000E warranty General Commands

Installing and configuring IP Phones Page 418 of 488

3Click the desired node to expand it.

4Click GEN CMD for the chosen Signaling Server or Media Card. The General Commands web page opens, as shown in Figure 145.

Figure 145

General Commands

5Select NodePwd from the Group drop-down list.

6Select nodePwdShow from the Command drop-down list.

7Click RUN.

The current node password information displays in the text area at the bottom of the web page.

8Enter the administrator IP Phone Installer Password in the Node Password box (see Figure 146).

9Select nodePwdSet from the drop-down list.

Communication Server 1000E Installation and Configuration