Nortel Networks 1000E warranty Universal Trunk card connections, Off

Installing and cross-connecting a trunk card Page 295 of 488

Note: See “Installing and cross-connecting a Power Fail Transfer Unit” on page 441 for connecting trunks with the PFTU.

End of Procedure

Universal Trunk card connections

The Universal Trunk card (NT8D14) provides eight Analog trunks that can function in the modes identified in Table 20. Refer to Table 21 on page 296 for the connections to the Universal trunk at the cross-connect terminal.

Table 20

NT8D14 Universal Trunk card – modes and option settings

Modes	Location	Jumper strap
Central (CO)	J1, J2	OFF
2-way TIE trunk (loop Dial Repeat)	J1, J2	OFF
2-way TIE trunk (Outgoing Incoming	J1, J2	OFF
Dial)
Recorded Announcement (RAN)	J1, J2	OFF
Paging trunk	J1, J2	OFF
Japan CO/DID operation	J1, J2	OFF
DID operation	J1, J2	ON
Loop length>2000 ohms
DID operation	J1, J2	OFF
Loop length <2000 ohms

Note 1: OFF indicates that no strap is present.

Note 2: J1 and J2 locations apply to all eight trunks.

Communication Server 1000E Installation and Configuration