Nortel Networks 1000E warranty General Commands

Page 342 of 488 Installing and configuring a Voice Gateway Media Card

2Open the desired node by clicking on the + next to the Node ID.

This displays the Signaling Servers and Voice Gateway Media Cards belonging to the node, as shown in Figure 116 on page 341.

3Click GEN CMD for the desired Voice Gateway Media Card.

The General Commands web page opens, as shown in Figure 117.

Figure 117

General Commands

4From the Group drop-down list, select Vgw.

5From the Command drop-down list, select vgwShowAll.

6Click RUN.

Figure 118 on page 343 shows the General Commands web page with the output from the vgwShowAll command. The output shows information about all the voice gateway channels.

553-3041-210 Standard 4.00 September 2007