Nortel Networks 1000E warranty Accessing an MRV Console Port through the on-board modem

Page 264 of 488 Connecting a Terminal Server

7Define a user name for the port. Enter the command:

DEFINE PORT 2 USERNAME “pty7”

Note: When typing the letters “pty”, they must be lower case letters. The number must equal the pty number configured on the system.

8Log out of the port. Enter the command:

LOGOUT PORT 2

End of Procedure

Accessing an MRV Console Port through the on-board modem

The MRV IR-8020M Terminal Server is equipped with a V.90/K56flex 56 Kbps on-board modem. The modem port is 23. Follow Procedure 68 to access an MRV Console Port through the on-board modem.

Procedure 68

Accessing an MRV Console Port through the on-board modem

1Connect an analog telephone line to the MRV telephone line port.

2Set up the remote PC connection.

3Dial in to the MRV onboard modem from the PC.

4From the PC, run HyperTerminal. Enter the command:

ATD [phone number]

Screen response:

CONNECT 9600/ARQ/V34/LAPM/V42BIS Login

5Log in to the In-Reach Element Manager using the default password, (see steps 4,5,6,and 7 in Procedure 62 on page 256).

End of Procedure

Once logged in to the on-board modem, it is possible to telnet to ports 1-20. It is also possible to rlogin to different IPs.

553-3041-210 Standard 4.00 September 2007