Nortel Networks 1000E warranty 292 of 488 Installing and cross-connecting a trunk card

Page 292 of 488 Installing and cross-connecting a trunk card

Before you proceed, install the cable from the slot that contains the Line card associated with the telephone being connected. Refer to “Installing the Main Distribution Frame” on page 353, if you require additional cable installation.

DANGER OF ELECTRIC SHOCK

Always use caution when installing or modifying telephone lines. Do not install telephone wiring during a lightning storm. Do not install telephone jacks in wet locations unless the jacks are designed for wet locations. Never touch uninsulated telephone wiring unless the line is disconnected at the network interface.

Refer to the Circuit Card: Description and Installation (553-3001-211) for full descriptions of country-specific circuit cards and their installation procedures.

CAUTION WITH ESDS DEVICES

Always handle circuit cards with caution to avoid damage caused by static electricity. Always store circuit cards that are not in use in an antistatic bag or the original packaging

Wear an antistatic wrist strap, such as the one shown in

Figure 98 on page 293, when handling circuit cards.

Static electricity can damage circuit card components.

553-3041-210 Standard 4.00 September 2007