Everpure EV9627-13, MR-600 manual N E F I T S, Installation T I P S E R a T I O N T I P S

EV9627-13

MR - 600 Replacement Cartridge

Mineral Reduction Cartridge

	B E N E F I T S
MR-600 Replacement Cartridge: EV9627-13	Improves equipment life and performance by
	removing at least 90%+ of all dissolved solids
	using Reverse Osmosis Separation Technology
	A reduction in Total Dissolved Solids (TDS)
	makes the water less likely to impart undesirable
	tastes in beverages, sauces, soups and other food
	products
	Especially useful on steamers, warmers, steam
	boilers and other evaporative equipment that are
	not emptied each day
	Heating surfaces maintain peak heat transfer
	efficiency, reducing cycle times and energy
	consumption
	Limits limescale build-up, which can cause
	excessive machine downtime and maintenance
	costs
	Sanitary cartridge replacement is simple, quick
	and clean. Internal filter parts are never exposed
	to handling or contamination

I N S T A L L A T I O N T I P S	O P E R A T I O N T I P S	A P P L I C A T I O N / S I Z I N G
Install vertically with cartridge hanging down	Change MR Cartridge on a regular preventative	Mineral Reduction Cartridge for High TDS
Allow 2-1/2” clearance below the cartridge for	maintenance program.	Waters
easy cartridge replacement	Change MR Cartridge when output capacity	Capacity: 600 Gallons per Day nominal
	diminishes by 15%, or when output pressure
Use piping materials suitable for high-purity	becomes too low.	Ideal for:
water after MRS System	Always flush the MR cartridge at time of	Coffee/espresso machines, reconstitution, ice,
Refer to Installation, Operation & Maintenance	installation and cartridge change	flash steamers, conventional steamers, combiovens
manual for cartridge flushing and RO start-up	Proper pre-treatment is required to control MR	and multiple applications
	Cartridge (membrane) scale formation and/or
	fouling.
	- Raw water hardness in excess of 7 grains per
	gallon should be softened to extend cartridge life
	- The raw water may contain chlorine or
	other oxidizers and the use of a carbon pre-filter
	is recommended.
	Contact EVERPURE Technical Service for
	pre-treatment recommendations