Nortel Networks 1000E warranty Configuring a Terminal Server, Dcd Dtr Dsr Rxd

Connecting a Terminal Server Page 255 of 488

•Procedure 65: "Accessing a CS 1000E from a PC through telnet Terminal Server" on page 259

•Procedure 66: "Configuring a transparent rlogin port" on page 260

•Procedure 68: "Accessing an MRV Console Port through the on-board modem" on page 264

Configuring a Terminal Server

Follow Procedure 62 to connect a Terminal Server with a CS 1000E system. Table 14 lists the MRV cables required to install the IR-8020M-101 Terminal Server in a CS 1000E system.

Table 14

Required MRV serial cables and connectors

Order CodeDescription

NTDU6302	Connects MRV Terminal Server to any
	standard DTE port or DCE port when a Null
	modem is used
NTDU6303	Used for telnet, rlogin connections
P/N-151-3028	Male RJ-45 to Male RJ-45 with connectors,
	10 feet
P/N-350-0308	Female RJ-45 to Female DB9

Customer-made cables with the following pin out (as NTDU6302) can also be used. See Table 15.

Table 15

Customer made cable pin out

Pins on DB9 Female		Pins on RJ45 Male (MRV Terminal Server)
1	DCD	2	DTR
6	DSR
2	RXD	3	TxD

Communication Server 1000E Installation and Configuration