Nortel Networks 1000E warranty First boot of a new system

Page 176 of 488 Installing and configuring the Signaling Server software

The system verifies the file systems.

•When the software runs for the first time on a new system, the hard disk will not be partitioned, so the test normally fails. Upon failure, the menu in Figure 50 appears.

Figure 50

First boot of a new system

CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)

=====================================================================

The filesystems verification failed! (This is normal for a new system.)

The hard disk must be (re)partitioned and (re)initialized. This will erase all data on the hard disk. The system will then reboot and the Install Tool will restart.

Please enter:

<CR> -> <a> - Partition and initialize the hard disk, then reboot.

Enter Choice> a

a.Enter a to start the new installation. The system displays the messages:

Partitioning hard disk ...

Hard disk partitioning succeeded.

Creating filesystems ...

Filesystems creation succeeded. Rebooting system ...

b.The Install Tool banner screen (Figure 49 on page 175) reappears. Press <CR> to verify the filesystems.

The disk check reports:

Filesystems verification succeeded.

c.Confirm or enter the date and time (Figure 51).

553-3041-210 Standard 4.00 September 2007