Nortel Networks 1000E warranty Connecting MG 1000T system components, Contents

168

Page 153 of 488

Connecting MG 1000T system components

Contents

This section contains information on the following topics:

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153

Connecting an MG 1000T Core to a Survivable MG 1000T Expansion 156

Connecting an MG 1000T Core to the ELAN subnet. . . . . . . . . . . . . . 161

Connecting a Signaling Server to the ELAN subnet. . . . . . . . . . . . . . . 162

Connecting a Signaling Server to the TLAN subnet. . . . . . . . . . . . . . . 163

Inserting a Shielded 50-pin to Serial/ELAN/TLAN adapter onto a

Media Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163

Connecting a Media Card to the ELAN . . . . . . . . . . . . . . . . . . . . . . . . 165

Connecting a Media Card to the TLAN subnet. . . . . . . . . . . . . . . . . . . 166

Connecting a Media Gateway to a Media Gateway Expansion . . . . . . 166

Introduction

Several system connections are required to make the MG 1000T operational. The MG 1000T must be connected to the CS 1000E through the TLAN subnet. The MG 1000T Core is directly connected with a CAT5 cross-over cable to each of the MG 1000T Expansions. The Media Gateway is directly connected to the Media Gateway Expander. The system’s components, such

Communication Server 1000E Installation and Configuration