Gateway 200 manual Modem, You see a Not enough memory error message, 261

Troubleshooting

■Use PC Doctor or a third-party diagnostic program to help determine if the memory module is failing. For more information, see “Adding or replacing memory” on page 246.

You see a “Not enough memory” error message

■Close all programs, then restart your notebook.

Help and

Support

For more information about troubleshooting memory errors in Windows XP, click Start, then click Help and Support.

Type the keyword memory error in the HelpSpot Search

box , then click the arrow.

Modem

Your modem does not dial or does not connect

■Make sure that the modem cable is plugged into the modem jack and not the Ethernet network jack. See “Left side” on page 3 to make sure that the connections have been made correctly.

■Make sure that your notebook is connected to the telephone line and the telephone line has a dial tone.

■Make sure that the modem cable is less than 6 feet (1.8 meters) long.

■Remove any line splitters or surge protectors from your telephone line, then check for a dial tone by plugging a working telephone into the telephone wall jack.

■If you have additional telephone services such as call waiting, call messaging, or voice mail, make sure that all messages are cleared and call waiting is disabled before using the modem. Contact your telephone service to get the correct code to temporarily disable the service. Also make sure that the modem dialing properties are set appropriately.

www.gateway.com 261