Samsung UN46FH6030F, UN55FH6030 Connecting to a Network, WEP or Tkip on your AP or specifications

Connecting to a Network

You can connect your TV to your local area network (LAN) using a wired or wireless connection.

✎✎After you have “physically” connected your TV to your network, you must configure the network connection to complete the process. You can configure the connection during the Initial Setup process (see page 10 ) or after the Initial Setup process, through the TV’s menu (see page 15).

The Wireless Network Connection

You can connect your TV to your LAN through a standard wireless router or modem. To connect wirelessly, you must first attach a “Samsung Wireless LAN Adapter” (WIS09ABGNX, WIS12ABGNX - sold separately) to the USB port on the side of your TV. See the illustration below.

Wireless IP Sharer
The LAN Port on the Wall (AP having DHCP Server)	TV Side Panel	Samsung Wireless
		LAN Adapter

LAN Cable (Not Supplied)

Samsung’s Wireless LAN adapter is sold separately and is offered by select retailers, E-commerce sites, and Samsungparts. com. Samsung’s Wireless LAN adapter supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using IEEE 802.11n. When you play video over a network connection using one of the other protocols, the video may not play smoothly.

Wireless Security

Most wireless network systems incorporate a security system that requires devices that access the network through an access point or AP (typically a wireless router or modem) to transmit an encrypted security code called an access key.

Your TV is compatible with the following security protocols:

yy Authentication Mode: OPEN, SHARED, WPAPSK, WPA2PSK

yy Encryption Type: WEP, TKIP, AES

If you select Pure High-throughput (Greenfield) 802.11n mode and the Encryption type is set to wireless router, your TV will not support a connection, in compliance with new Wi-Fi certification

WEP or TKIP on your AP or specifications.

English - 7

[UE6030-6070-ZA]BN68-04458E-Eng.indd 7 2013-02-01 ￿￿ 10:59:00