![](/images/new-backgrounds/1228752/228752213x1.webp)
Installing a 5.25-inch Peripheral Device
See Figures
1.Observe the warnings and cautions on page 3, “Safety Guidelines.”
2.Remove both side covers and the top cover (page 80).
3.Remove the
4.Remove the screws and filler panel, and set them aside.
OM05315
Figure 4-15. Filler Panels
5.Push the tab on the left side of the EMI metal shield to the right to disengage it from the chassis. Save the shield.
6.Remove the device from its packaging, and place it on an antistatic surface.
7.Record the device model and serial number in your equipment log.
8.Set any jumpers and/or switches on the device according to the manufacturer’s instructions.
M440LX Server System Product Guide | 107 |