Problems With Application Software
If you have problems with application software, do the following:
1.Verify that the software is properly configured for the system. Refer to the software installation and operation documentation for instructions on setting up and using the software.
2.Try a different copy of the software to see if the problem is with the copy you are using.
3.Make sure all cables are installed correctly.
4.Verify that the system board jumpers are set correctly.
5.Try running the software in a different speed mode. Refer to Chapter 3, "Configuring The System."
6.If other software runs correctly on the system, contact your vendor about the failing software.
If the problem persists, contact the software vendor's customer service representative for assistance.
212 | Chapter 10 Solving Problems |
