Intel MB440LX manual Removing the RPX Module

Removing the RPX Module

See Figure 4-9.

1.Observe the warnings and cautions on page 3, “Safety Guidelines.”

2.Remove the left side cover (page 80).

3.Remove the RPX rail.

4.Holding the module by its top edge or upper corners, carefully rock it back and forth until the edge connector pulls free.

5.Unplug the RPX battery.

6.Store the module in an antistatic protective wrapper, or place it component side up on a nonconductive, static-free surface.

7.Install the rail.

96 Chapter 4 Working Inside Your System