Mounting a SCSI SCA Hard Disk Drive in a Plastic Carrier

See Figure 5-1.

1.Remove the 3.5-inch hard disk drive from its protective wrapper, and place it on an antistatic surface.

2.Record the drive model and serial number in your equipment log.

3.Orient the drive so the connector is near the top surface of the drive, and place it on an antistatic surface.

4.Place the plastic carrier on top of the drive.

5.Using four screws of the appropriate size and length (not supplied), attach the carrier to the drive.

OM05787

Figure 5-1. Hard Disk Drive and Plastic Carrier

M440FX Server System Product Guide

135

Page 135
Image 135
Intel MB440LX manual Mounting a Scsi SCA Hard Disk Drive in a Plastic Carrier, 135