1

2

3

OM05785

Figure 4-1. Side Covers

1Retaining screw

2Metal loop (for padlock)

3Built-in handle

Replacing a Side Cover

The identical side covers can be installed on either side of the system. See Figure 4-1.

1.Before replacing the side cover, make sure you did not leave any tools or loose parts inside the chassis.

2.Ensure that add-in boards are firmly seated in their respective slots, retaining brackets are firmly secured with screws tightened to

6.0 inch-pounds, and interior cables are properly connected.

3.Position the side cover over the chassis so that the metal tabs across the top and bottom edges of the cover align with the slots in the top cover and bottom edge of the chassis. Slide the cover toward the front of the system so that the tabs along the front edge of the cover firmly engage in the front slots of the chassis.

M440LX Server System Product Guide

81

Page 81
Image 81
Intel MB440LX manual Replacing a Side Cover, Side Covers