Intel MB440LX manual Installing a Pentium II Processor

Installing a Pentium II Processor

See Figure 4-7.

1.Observe the warnings and cautions on page 3, “Safety Guidelines.”

2.Remove the left side cover (page 80).

3.Being careful not to touch the components or gold edge connectors on the processor module, remove it from its protective wrapper and place it heat-sink side down on a nonconductive, static-free surface.

4.Record the module serial number in your equipment log.

5.Press the locking tabs inward until they remain retracted.

6.Hold the module by its top edge or upper corners, and firmly press it into the connector (Figure 4-7) on the system board. Press the locking tabs outward so they engage the support bracket.

CPU1

CPU0

OM05775

Figure 4-7. Installing a Pentium II Processor

7.Replace the left side cover (page 81).

8.Run the SCU to configure the system. For information about running the utility, see Chapter 3, "Configuring The System."

M440LX Server System Product Guide 91