Intel MB440LX manual Checking the Power Cords, Turning on Your Server

Checking the Power Cord(s)

▲WARNING

Do not attempt to modify or use a supplied AC power cord if it is not the exact type required.

If a power cord supplied with the system is not compatible with the AC wall outlet in your region, get one that meets the following criteria:

∙The cord must be rated for the available AC voltage and have a current rating that is at least 125% of the current rating of the system.

∙The connector that plugs into the wall outlet must be a grounding-type male plug designed for use in your region. It must have certification marks showing certification by an agency acceptable in your region.

∙The connector that plugs into the AC receptacle on the system power supply must be an IEC 320, sheet C13, type female connector.

∙In Europe, the cord must be less than 4.5 meters (14.76 feet) long, and it must be flexible <HAR> (harmonized) or VDE certified cordage to comply with the system's safety certifications.

Turning on Your Server

▲WARNINGS

Ensure that the line voltage selector switch on each power supply is set to the correct line source voltage (see

page 42). If the setting is incorrect, the power supply will be damaged when you plug the power cord into an AC outlet.

The power button on the front panel of the server does not turn off the AC power. To remove AC power from the server, you must unplug the AC power cord from each power supply or wall outlet.

1.Make sure all external devices, such as a monitor, keyboard, and mouse (optional) have been connected.

2.Remove drive protection cards (if present) from the diskette and tape drives.

3.Turn on your video monitor.

M440LX Server System Product Guide 45